Why car drying is not a detail
Washing your car but not drying it properly ruins half the job.
Leftover water causes:
-
Limescale and water stains
-
Rust in folds
-
Streaks on paint and glass
-
Long-term paint damage
Drying your car is not cosmetic , but about preserving its substance.
The biggest mistakes when drying your car
-
Allow to air dry
-
Old cotton cloths
-
kitchen paper
-
Too much pressure
-
Dirty or too small cloths
All of these things cause micro-scratches or stains.
Step-by-step: How to dry your car properly
1) Dry immediately after washing
Don't wait. As soon as water dries, limescale deposits form – especially in sunlight or with hard water.
2) Use the correct drying towel
A large, high-pile microfiber drying towel absorbs water without friction .
Suitable microfiber drying cloth:
https://7wash.ch
3) Laying down instead of rubbing
Place a cloth on top, let it absorb the water, then lift it up.
Don't scrub. Don't wipe like a window cleaner.
4) Maintain the order
-
Roof
-
discs
-
bonnet
-
pages
-
tail
Dirtiest areas always last.
5) Don't forget folds and edges
Water collects especially in:
-
Door rebates
-
trunk sill
-
mirror housings
-
Fuel cap
This is where rust starts first.
Why cheap wipes cause harm
Affordable microfiber:
-
It has poor suction.
-
distributes water instead of absorbing it
-
It scratches even with light dirt.
One good drying towel replaces several bad ones .
Extra tip: Reduce drying through protection
Paints with a protective coating cause water to bead up and roll off.
This saves time, reduces stains and protects the paintwork.
Care and protection products:
https://7wash.ch